Entire Office chairs can be expensive especially for those well-known brands such as Staples, Herman Miller, Ha worth, Knoll, steel case. but sometimes the only thing your office chair needs is a few replacement parts for a simple repair. for example, replace chair caster wheels and chair bases, gas lift, chair armrest, and mechanisms for a low-cost, high-quality.

  So it is important to know what are office chair replacement parts. How to properly use office chair replacement parts. After you read this article, Next time when your favorite office chair is broken, Maybe you can consider fixing it instead of buying a completely new office chair.

What are office chair replacement parts?

office chair replacement parts mainly include 5 serials, see the details below.

1.Replacement wheels for office chairs：a set of 5 wheels or rotating balls mounted in a swivel frame with kinds of floors or carpet. they usually used for the support and movement of office chairs. The universal standard size is 7/16" x 7/8" (11mm x 22mm) sockets for stems.

2.office chair base replacement: The foundation of an office chair, which is made of steel iron, aluminum, wood, or plastic. An office chair base typically includes five legs that extend from a central column, providing stability in the office chair. office chair base replacement parts had universal Standard Size which will fit almost every office chair on the market. It has the standard 2" (50mm) center hole for gas lift cylinders and standard 7/16" x 7/8" (11mm x 22mm) sockets.

3.office chair gas cylinder: An office chair gas cylinder is a form of office chair that allows the user to adjust their height in relation to the height of a desk, In order to keep comfort and ergonomic benefit. Our office chair cylinders are typically universal with 2" (50mm) center hole, The only difference between all standard cylinders is what is the travel for your office chair seat.

4.replacement office chair tilt control mechanism: It is located underneath the seat of an office chair. This is a mechanical component that enables you to make specific adjustments to the seat and backrest of the chair, like the seat angle of the backrest. The front of the seat can be tilted up or down. This reduces the pressure on the lower back, ensures proper posture, and alleviates blood flow to the legs and feet.

5.office chair armrest replacement: They always come in pairs, to provide a place for you to rest your forearms and relieve strain on your shoulders and wrists.

How to properly use office chair replacement parts?

Once you have the right office chair replacement parts, get the following tools. a hammer, a pipe wrench, maybe WD40 to help get the chair apart.

Start by separating the broken office chair gas cylinder and Replacement wheels from the base of the office chair. 

Turn the office chair onto its side and use the hammer to lightly tap the office chair base replacement 

Take the wrench at the top of the broken office chair gas cylinder and twist it until it is released from the office chair tilt control mechanism. You can also remove the office chair tilt control mechanism by unscrewing the bolts at the bottom of the seat and then using the hammer to lightly tap the tilt control mechanism away from the office chair.

Once you have the office chair gas cylinder removed, replace it with the new office chair replacement parts.

Put the caster wheels into chair base sockets and have the office chair gas cylinder pop into the base of the chair then lift the switch into the mechanism. Once this is completed, you can bring the chair back to its upright position and install the armrest by a wrench.

Important thing! Everything should fasten together to make the office chair sturdy before using it.

Please click remove office chair replacement parts to check the pictures and video guide if you still have questions.

Please click assemble office chair replacement parts to check the pictures guide if you still have questions.